SAJC 2026 Prelim P2 Ans
Uploaded by Grassy155 · 7 November 2026
Preview
Text from the first pagesH2 Physics Prelim Exams 2026 – Paper 2 Solutions 1(a) rate of change of velocity [1] 1(b) Gain in KE = Loss in GPE ½m (vf2 – vi2)= mg(hi – hf) v2 = 5.92 + 2 × 9.81 × 7.8 v2 = 187.846 v = 13.711 = 13.7 or 14 m s–1 or by resolving components Vertically: ↑:v2 = u2 + 2as v2 = (5.9 sin60o)2 + 2 (–9.81) (1.2–9.0) vv = 13.3844 = 13.4 Horizontally: vh = 5.9 cos60o vh = 2.95 Resultant velocity, v = √(13.42 + 2.952) = 13.72 = 13.7 or 14 m s-1 [1] [1] [1] [1] [1] [1] 1(ci) W = mg = 78 × 9.81 = 765.18 = 765 N Resultant Force = 740 + 950 - 765 = 925 N Acceleration = F/m = 925/78 = 11.9 m s-2 [1] [1] [1] 1(cii) (As the diver moves down their) speed decreases (So) viscous force / drag (force) decreases [1] [1]
2(a) correct arrow direction – vertically downwards arrow for weight and arrow perpendicular to the cone, inwards and upwards for normal contact correct naming for both forces – weight and normal contact force/ normal force [1] [1] 2(b) vertical component of the normal contact force = weight, thus Fnet = 0 in the vertical direction horizontal component of the normal contact force is resultant force towards centre (of circle) [1] [1] 2(c) N cos52o = W = mg ----- (1) N sin52o = mv2/r ----- (2) (2)/(1): tan 52o = v2/gr v = gr tan 52o = 9.81 (0.15)(tan 52o) = 1.372 = 1.4 m s-1 (shown) [1] [1] [1] 2(d) v = rω or a = rω2 ω = 1.4 / 0.15 or √(9.81 x tan 52° / 0.15) = 9.3 rad s–1 or 9.149 = 9.1 rad s-1 [1] 2(e) Since tan 52o = v2/gr, v2 is proportional to r so if speed increase, radius must also increase or (same mass) resultant/centripetal force/acceleration (N sin52 o and N = W/ cos52o) = constant, since F = mv2/r or a = v2/r, v2 is proportional to r so if speed increase, radius must also increase [1] [1] [1] [1]
3(ai) Gas is ideal as the graph is a straight line through the origin, satisfying the ideal gas equation pV = NkT [1] 3(aii) pV = NkT N = pV / kT = gradient of graph = 270 / 8.0 x 10-21 or substitute a data point n = N/NA = (3.4 x 1022)/ (6.02 x 1023) = 0.056 mol [1] [1] 3(b) ½ m<c2> = 3/2 kT When pV = 270 J, kT = 8.0 x 10-21 J ½ m (19002) = 1.5 (8.0 x 10–21) m = 6.65 x 10–27 kg = (6.65 x 10–27) / (1.66 X 10–27) = 4.0 u [1] [1] [1] 4(a) work done per unit charge by an external force In bringing a small positive test charge from infinity to that point [1] [1] 4(bi1) potential (due to proton) = 1.6×10−19 4𝜋𝜋(8.85×10−12)(10×10−12) = 143.86888 potential (due to electron) = −1.6×10−19 4𝜋𝜋(8.85×10−12)(110×10−12) = 13.07899 V = 143.86888 - 13.07899 = 130.7 ≈ 130 V (2sf) [1] [1] 4(bi2) 𝑉𝑉𝑃𝑃 = 𝑄𝑄𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝4𝜋𝜋𝜀𝜀𝑝𝑝𝑥𝑥 + 𝑄𝑄𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝4𝜋𝜋𝜀𝜀𝑝𝑝(120 × 10−12 − 𝑥𝑥) = 1.6 × 10−19 4𝜋𝜋(8.85 × 10−12)(30 × 10−12) + −1.6 × 10−194𝜋𝜋(8.85 × 10−12)(90 × 10−12) = + 31.91 V = 32 V [1] 4(bi3) cross drawn midway, equidistant between the electron and the proton [1]
4(bi4) starting from (10, +130) to (110, –130) curve decreasing gradient until x = 60 pm, crossing V = 0 at (60, 0) and then getting steeper after x = 60 pm curve passing through (30, +32) and (90, -32) [1] [1] [1] 4(bii) 𝐸𝐸𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 𝑄𝑄𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝4𝜋𝜋𝜀𝜀𝑝𝑝𝑥𝑥2 + 𝑄𝑄𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝4𝜋𝜋𝜀𝜀𝑝𝑝𝑥𝑥2 = 1.6×10−19 4𝜋𝜋(8.85×10−12)(60×10−12)2 + 1.6×10−19 4𝜋𝜋(8.85×10−12)(60×10−12)2 = 8.0 x 1011 N C-1 (to the right) [1] [1] 4(biii) Rotate clockwise Accelerate upwards [1] [1]
5 (a) The magnetic flux density is defined as the force acting per unit current per unit length on a conductor placed perpendicular to the magnetic field [1] [1] (b)(i) Protons are positively charged thus (current is in direction of the motion of the proton) and magnetic force towards the centre of the circular path (may describe direction of magnetic force at a specific point) By Fleming left hand rule, using the direction of current and force, the magnetic field must be out of the paper. [1] [1] (ii) The centripetal force is provided by the magnetic force FB = FC Bqv = mv2/r v = Ber/m ½ mv2 = ½ m (Ber/m)2 𝐾𝐾𝐸𝐸 = 𝐵𝐵2𝑒𝑒2𝑟𝑟2 2𝑚𝑚 [1] [1] (iii) E-field direction is in same direction to the motion of the proton whenever the proton crosses the gap. The electric force acting on the proton causes it to accelerate continuously each time it crosses the gap thus KE increases. [1] [1]
6(a)(i) From Faraday’s equation, Emf = - change in flux linkage / time taken, ⇒ dt = - change in flux linkage / emf = - (+8.0 x 10-5) / (-5.0 x 10-4) = 0.16 s Speed = displacement / dt = 0.03 / 0.16 = 0.1875 = 0.19 m s-1 [1] [1] (ii) Increase in flux linkage = N x (5 – 3) x 10-6 = 8.0 x 10-5 Wb-turns ⇒ N = 40 turns [1] (iii) Since the coil moves at constant speed, Ɛ = constant and Ɛ = - dΦ / dt thus - dΦ / dt = constant, the Φ vs t graph should have constant gradient. From P to x = 3.0 cm, At P, magnetic flux = 3 x 10-6 Wb (given in part (ii)), thus magnetic flux linkage = N(magnetic flux) = 40 (3 x 10 -6) = 1.2 x 10-4 Wb turns The magnetic flux linkage increases by 8.0 x 10-5 Wb-turns from P to x = 3.0 cm (given in part (i)). Thus final magnetic flux linkage at x = 3.0 cm is 1.2 x 10-4 + 0.8 x 10-4 = 2.0 x 10-4 Wb-turns. This is a positive gradient to show an increase in flux linkage. From x = 3.0 cm to x = 6.0 cm, Since Ɛ is doubled and changed in sign from -5 x 10-4 V to +10 x 10-4 V and Ɛ = - dΦ / dt , the gradient in this region should be doubled and negative to show a decrease in flux linkage. This mark is for those who read ai) and noticed -5 x 10-4 V n +10 x 10-4 V in emf graph ● inverted V shape [1]
● gradient of 2nd segment = twice of 1st segment [both hv equal x-axis so check the change in Φ is twice (16 small sqs) in segment 2 compared to segment 1 (8 small sqs)] ● the change in Φ for 1st segment must be the value in ai) i.e. 8.0 x 10 -5 Wb-turns This mark is for students who used the values in aii) to calculate the initial Φ ● correct initial flux linkage at 1.2 x 10-4 Wb-turns [1] (b) By Faraday’s law, ring cuts the magnetic flux/field lines and an e.m.f. is induced in the ring. Induced e.m.f. causes induced/eddy currents to form in the ring. Either, By Lenz’s law, the induced currents flow in such a direction so as to oppose the change in flux/ flux cutting the ring, So an resistive/opposing force is induced/produced on the ring to oppose its motion. Or Currents in the ring dissipates thermal energy, And this thermal energy comes from/is converted from the mechanical energy of the oscillations. [1] [1] [1] [1] [1] [1] 7(a) tungsten has a very high melting point [1] 7(b) Using I / I₀ = e^(-µx) 0.5 = e^(-2.46 × x) x = ln(2) / 2.46 = 0.282 cm [1] [1] (c)(i)1 From Table 7.1, µ of muscle = 0.40 cm⁻¹ Using I / I₀ = e^(-µx) ratio along MM = e^(-0.40 × 8.0) = 0.041 or 0.
Content continues in the PDF. Download PDF
