2025 DHS-HCI H3 Chemistry Prelim Q1 insert final
Uploaded by Kozak327 · 10 November 2026
Preview
Text from the first pagesThis document consists of 3 printed pages and 1 blank page. HWA CHONG INSTITUTION C2 Preliminary Examination Higher 3 CANDIDATE NAME CT GROUP 2 4 S CENTRE NUMBER S INDEX NUMBER CHEMISTRY Paper 1 INSERT 9813/01 22 September 2025 2 hours 30 minutes READ THESE INSTRUCTIONS FIRST This insert contains information for Question 1. Do not write your answers on the insert. This paper is a collaboration between HCI and DHS.
2 © Hwa Chong Institution 2025 9813/01/INSERT/C2 Preliminary Examination Information for Question 1 The synthesis of zinc oxide (ZnO) nanostructures such as nanorods from aqueous solution has huge potential in the area of large-scale electronic device fabrication. Extract 1: Hydrothermal synthesis of arrayed ZnO nanorods Various chemical, electrochemical and physical deposition techniques (such as metal-organic vapo ur deposition techniques and pulsed laser deposition) have been used for nanomaterials synthesis. A novel approach to the fabrication of smart and functional metal oxide particulate thin films and coatings is demonstrated on the growth of ZnO nanorod arrays, involving a template-less and surfactant-free aqueous method. This enables the generation of advanced metal oxide thin films with controlled complexity. In a typical hydrothermal synthesis, a substrate (material on which nanomaterials are grown on such as silicon wafer) is submerged in an equimolar aqueous solution of zinc nitrate hexahydrate (Zn(NO3) 2·6H2O) with hexamethylenetetramine (HMTA), (CH2)6N4. The solution is heated to approximately 95 °C for several hours in a regular laboratory oven . Subsequently, the substrate was thoroughly washed with deionised water to eliminate residual salts, dried in air, and heated in the oven at 300 oC for 1 hour. Fig. 1. 1 shows Scanning Electron Microscope (SEM) images of ZnO nanorod arrays produced by this method. This process results in vertically aligned, crystalline nanorods with high aspect ratio. Fig. 1.1 SEM images of hydrothermally grown ZnO nanorods. (a) Top-down view, (b) Tilted side-view. (Note: 1 m = 1 × 10−6 m; 1 nm = 1 × 10−9 m) 200nm 1m 2m
3 © Hwa Chong Institution 2025 9813/01/INSERT/C2 Preliminary Examination Extract 2: Growth mechanism of ZnO nanorods Hydrothermal growth is a low temperature process where single-crystalline 1D material can be produced on various substrates, including plastics and textile fibers. Although the exact chemical reactions during the hydrothermal growth is still unclear, we have hypothesi sed, based on the experimental observations, the growth mechanism for the ZnO nanorods on seedless substrates. First, HMTA can hydrolyse to produce ammonia and methanal. Next, Zn2+ ions from zinc nitrate can react directly with ammonia and/or hydroxide ions to provide Zn( II) complex es, depending on the pH and temperature conditions. ZnO nanorods are then formed on substrates by reactions of these Zn( II) complexes as shown in equations 1 and 2. equation 1 [Zn(NH3)4]2+(aq) + H2O(l) → ZnO(s) + 4NH3(aq) + 2H+(aq) equation 2 [Zn(OH)4]2−(aq) → ZnO(s) + H2O(l) + 2OH−(aq) All these reactions occur in equilibrium and, hence, can be controlled by tuning the reaction parameters, such as precursor concentration, pH, and temperature.
4 © Hwa Chong Institution 2025 9813/01/INSERT/C2 Preliminary Examination BLANK PAGE Copyright Acknowledgements: Question 1 © L. Vayssieres. Adv. Mater., 15, 464-466 (2003) Question 1 © S. Boubenia, A. S. Dahiya, G. Poulin-Vittrant, F. Morini, K. Nadaud & D. Alquier. Sci. Rep., 7, 15187 (2017)
Content continues in the PDF. Download PDF
